How To Catch Smeargle In Pokemon Go
- Look at any Pokémon in the Pokémon tab.
- Tap the Camera Icon in the top right to start taking photos of the Pokémon.
- Take pictures of the Pokémon.
- When you’re done, tap the arrow in the top left corner to exit.
- Review your photos, and look for a Smeargle. It will be close to the camera, and probably blocked your original subject!
- If Smeargle photobombed one of them, it will appear next to you in the over world, ready to be captured.
- Keep in mind Smeargle can run just like any Pokemon, so use your best Berries to keep him in line.
How Do You Catch Smeargle In 2021
How can I get a Smeargle in Pokémon GO?
Also Check: What Level Does Onix Evolve Into Steelix
Pokemon Go: Encountering Shiny Smeargle
Although it can be found in the wild in the main series in Pokemon GO, the Painter Pokemon is exclusive to the games Camera Mode. If the games random number generator pops Smeargle into a trainers picture, the Pokemon will spawn on to the game map.
Once it appears, it can be a tricky catch with a 25% catch rate. Fortunately for players, with a 7% flee rate, Smeargle isnt likely to take off after breaking out of a Poke Ball throw. After catching it, finding the Shiny comes down to luck. However, there are things players can consider in order to maximize their chances at finding the Shiny.
Specifically, players should take note that only a limited number of Smeargle will appear per day, according to Niantic. According to Pokemon GO community group The Silph Road, this cap is set to 15 encounters per day. With that in mind, players will want to take loads of snapshots and attempt to locate as many Smeargle as possible in order to ensure the best chances at the Shiny appearing.
Unfortunately for players, there is no slam dunk guarantee that will allow the Shiny Smeargle to spawn, but playing the games percentages is the best means to find it.
Despite Pokemon GOs crossover event ending soon, diminishing the chances of catching Shiny Smeargle, it should still be catchable at standard Shiny encounter rates.
Dont Miss: Strong Against Dark
Don’t Miss: Pokemon Platinum Reset Game
How To Catch Smeargle Pokemon Go
The following steps will help you catch Smeargle in Pokemon Go.
On the top right corner, select the camera icon and click pictures of your Pokemon.
Take various pictures of your Pokemon.
Look through the captured photos.
There is a chance that Smeargle would have photobombed in one of the photos.
If Smeargle has not photobombed, repeat the steps mentioned above.
If Smeargle has photobombed, exit camera mode and Smeargle must be available in the wild.
Tap on it and catch Smeargle.
An Encounter With Smeargle
If Smeargle appeared in one of the photos, then Pokemon GO players will encounter the artistic monster upon exiting the photo mode. From there it’s as easy as feeding it the appropriate berries and throwing Ultra Balls at it. It shouldn’t be long before Smeargle has been added to the trainer’s party and checked off of the in-game Pokedex.
Pokemon GO is currently available across Android and iOS devices.
You May Like: Flower Crown Sylveon
What Is A Smeargle And Why Do You Want It
Smeargle is a normal type Pokémon from the 2nd generation and has a beagle-like appearance. Its tail is in the shape of a paintbrush. In fact, paint drips from the tip of it, and it uses that paintbrush to fight other Pokémon.
Initially seen in Pokémon Gold and Silver, Smeargle uses its paintbrush to communicate to its trainers, as well as to attack.
In Pokémon GO, Smeargle’s paintbrush ability, called sketch, translates into the power to take almost any move set from the Pokémon it photobombs in the new Snapshot AR mode.
This means it can take on a powerful Pokémon’s moves and use them in battle. I have been trying to get it to take on my Vaporeon’s Hydro Pump, but so far, it hasn’t photobombed that Pokémon.
Pokemon Go Smeargle: How To Take A Snapshot And Catch A Shiny Smeargle
Pokemon Go Smeargle has been in the game for a while now but if you’ve not ticked the artistic pup off your Pokedex yet, you’re not going to run into one in the wild. That’s because there’s a very unique method of catching Smeargle in Pokemon Go, one that requires some special knowledge. On top of that, shiny Smeargle is coming to the game very soon thanks to an upcoming crossover event with New Pokemon Snap. So without further ado, here is everything you need to know about Pokemon Go Smeargle and how to catch a shiny one.
Don’t Miss: Fairy Weakness Pokemon
How To Make Smeargle Appear To Capture It In Pokemon Go
So you will have understood it, we are talking about photos, which means that you will have to use the « new GO Snapshot feature » of Pokemon Go to make Smeargle appear. All you have to do is take out one of your Pokemon and take pictures until Smeargle comes to embed itself on the picture .
Warning, Smeargle does not appear in real time on the image, you can see its presence on your photo gallery. When you see it, click on the back arrow to be able to capture it and add it to your Pokemon collection.
Note that Smeargle learns of the attacks from the Pokemon he jumped into during your photo shoot. Finally, please note that Smeargle only appears once a day, so you will not be able to capture them at will. Only one capture per 24 hours !
Dont Miss: Spritzee Evolution
Pokmon Go: How To Find Shiny Smeargle
Shiny Smeargle is making its debut in Pokemon Go. This guide will show players how they can find and capture this limited Shiny Pokemon.
Shiny Smeagle will be making its debut in Pokemon Go. This guide will show players how to find and capture this Pokemon. Pokemon Go will soon be celebrating an event to celebrate the release of New Pokemon Snap. This is the first new entry in the series since the original and plans to bring back the rail-snapshot-shooter gameplay fans of the original have wanted for generations. New Pokemon are featured in the game from Unova, Sinnoh, Kalos, and more. Players will now have the opportunity to see what all the hype was about for an entirely new generation. During this event, players will have the chance to find their own Shiny Smeargle in Pokemon Go. This guide will show players how they can find it.
This event will run from April 29th to May 2nd, leaving just a few days to obtain Shiny Smeargle. Once the event is over, the Shiny version will be removed from the game, preventing players from capturing it until a future event brings it back. This will make Shiny Smeargle one of the rarest Pokemon in the game. Finding an original one requires tons of patience but it can be rewarding to find it for the first time. Here is how players can find a Shiny Smeargle in Pokemon Go.
Read Also: Sword And Shield Water Bike
How To Catch Smeargle
As with his previous inclusions in Pokémon GO, Smeargle isnt just going to spawn in the wild. While many species have had their spawn rates boosted, Smeargle is always a special case. Even after his generation was added to the game it took months for him to appear and only via one unique method: pictures.
This is how you catch Smeargle once again during the Johto Collection Challenge. To do so, just open your Pokémon menu and select any character. Tap the camera icon at the top right to open the augmented reality camera feature. If you have AR+ enabled youll need to go through the motions of spawning the Pokémon in the world around you, but with it odd they should just walk out in front of you. Once they do simply tap the button at the bottom of the screen to take a picture.
In the image you took you should see Smeargle photobombing you, but this can take multiple tries, sometimes 10 or more pics . Exit out when you see him and he will spawn right next to you in the game world. Tap and catch as normal to complete this part of the challenge, but be sure to check out our full Johto Collection Challenge guide if you need help with the rest.
But that explains how to catch Smeargle for the Johto Collection Challenge in Pokémon GO, so hopefully youre all set.
RELATED TOPICS :
Do You Have Any New Information
Smeargle is one of the most fun Pokémon to catch in recent times. The idea that it can appear randomly inside another activity is brilliant, and I really hope we see more of that in the future.
But what about you? Have you seen other sure-fire ways to catch it? Or maybe you have information we don’t? Let us know in the comments, and we will update as we go!
You May Like: Part 5 Pokemon Journeys
When Did Smeargle Come Out In Pokemon Go
Smeargle, the Generation 2 painting Pokemon, is now available to catch in Pokemon GO. Niantic has held off on adding Smeargle to the game for some time now, with the rest of the Johto Pokemon being added in 2017, but Smeargle is special due to its Sketch ability, which can copy the ability of another Pokemon.
Pokemon Go Johto Collection Challenge And The Celebration Event
Aside from Smeargle, there are eight other Pokemon in the Johto Collection Challenge. Most of them appear at the same rate in the wild, especially the Generation II starters. The only one with a lower spawn rate is Miltank, but it can be found in research encounters and three-star raids.
Once all nine Pokemon are caught, the collection is completed, and another number gets added to the Elite Collector Badge. There have been four challenges in total, and the Johto collection is on the easier side than the others.
The Pokemon GO collection challenges aren’t the only part of the regional events. Generational Legendaries are also a draw, and the Three Legendary Beasts are the center of attention for the Johto Celebration event.
Entei starts the event off with a week of its own in five-star raids within Pokemon GO. After that, Raikou and Suicune will have their subsequent weeks to defeat and catch in separate raids.
For another Generation II Legendary, players will need to complete timed research challenges for the Pokemon GO Johto Celebration, which will have about two weeks in total. Most objectives revolve around defeating Team Rocket members and catching Shadow Pokemon.
You May Like: Where To Find Exp Share In Pokemon Emerald
How Many Photos Does It Take To Get Smeargle In Pokmon Go
Based on early impressions, the amount of attempts it takes to get Smeargle in Pokémon Go varies widely.
For us, it’s ranged between 30 photos across 10 attempts for Smeargle to appear, the very first attempt for a lucky member of the Eurogamer team, and after hundreds of photos taken, not a single appearance for another.
This appears to line up with a lot of other players’ experiences too. The key is to simply keep trying – and if Smeargle isn’t showing up, take a break and try again later.
Thats the Johto dex complete
Remember since you can catch more than one Smeargle, there’s no rush at all. If it takes took long, considering using the Snapshot mode casually until Smeargle appears. It will show eventually!
April 2022 introduces the Silent Schemes event, which requires learning new Leader counters and Giovanni counters.Elsewhere, we’ve recently seen new Ditto disguises as part of the Season of Alola, which also introduced An Akala Adventure and more Gen 7 Pokémon including Fomantis and Tapu Lele.Elsewhere, off the back of the Go Tour Johto event is Masterwork Research Apex to complete.
How To Find Smeargle In Pokemon Go
Head into your items bag and select the camera item. This will allow players to enter the AR mode and capture a picture of one of their Pokemon. Select any Pokemon you wish and continue to take snapshots of it. Do this 10 at a time and keep doing this until Smeargle appears in the background of your photo. It’s completely luck-based at what point Smeargle will make an appearance in these photos. Once it does appear, it will show up in the photos while they are developing. Back out of the camera mode to find Smeargle in the overworld.
Tap it, give it a berry, and throw a Pokeball at it. Although, it does have the option to run away. If Smeargle runs away, players will have to wait until tomorrow for another chance to capture it. To save yourself the time give it a Berry that will increase its catch rate and use an Ultra Ball. This will increase the chances of avoiding it running away. While this doesn’t require a lot of work to capture, encountering it will be the true test of patience. Make sure to find it before this upcoming Sunday to complete the challenge.
Pokemon Go is available now on iOS and Android.
Read Also: Resetting Soul Silver
Can You Still Catch Smeargle In Pokemon Go
You can only catch one Smeargle per day this resets at midnight local time, not 24 hours after catching the last Smeargle. The Pokemon you take a photo of doesnt influence the chance of Smeargle appearing. We dont know the exact chance of Smeargle showing up, so simply rinse and repeat the above steps until it does.
Pokemon Go Smeargle Cp
So why should you be going after Smeargle in Pokemon Go? Does it have much strength in battle? Well, not really. It has a max CP of 50, though with the moveset mimic ability it can be pretty useful for certain raids if tailored correctly.
Pokemon Go is still evolving and being added to, so there will be plenty more guides to find in USG in the future. In the meantime, why not check out our guide on the next Pokemon Go Community Day event. Theres also our tips on evolving Eevee in Pokemon Go.
Recommended Reading: How To Get Espeon Pokemon Sword
Pokemon Go: Smeargle Not Appearing In Photos
The frustrating thing about getting Smeargle is that it appears to be a dice roll as to whether or not it will appear in your photos. It took us 231 tries before getting it, though some users have reported getting Smeargle after a couple of tries. Just keep taking photos and you will get the chance to catch Smeargle. It just might take a while.
What Happens When You Use A Tm On A Smeargle
Unlike a normal Pokémon, Smeargle doesn’t have its own move set. It takes the moves from the Pokémon it photobombs. This means a normal Technical Machine won’t work the way it normally does. Instead, it will give your Smeargle a completely random attack power from any of the other Pokémon in the game.
It seems to me that the best way to get the Move set you want is to make sure the Pokémon you want Smeargle to photobomb has those powers already available. That way, you don’t have to worry about the randomness that Smeargle seems to inherently bring to the table.
You May Like: How To Get Joystick On Pokemon Go
Pokemon Go: How To Catch Shiny Smeargle
Shiny Smeargle is appearing in Pokemon Go for the first time as part of the New Pokemon Snap event here are some tips to help you catch one.
Pokemon Go is celebrating this weeks release of New Pokemon Snap with a special event until May 2. As part of the event, the Painter Pokemon Smeargle will be photobombing snapshots you take more frequently than usual, and you have your first chance to encounter a Shiny Smeargle in the game. This Shiny variant will only be available during the event, however, so if youre hoping to add it to your collection, here are some tips on how to catch Shiny Smeargle.
Will You See When Smeargle Arrives
There are a few little tips to help you see when Smeargle appears to photobomb your AR pic. Keep an eye on the thumbnail in the bottom corner. It will blink white three times when Smeargle bombs you instead of just once.
The latest numbers are in from Reddit, and we now know Smeargle will only appear in your first photo. So if you don’t see those three white pulses on the first photo, simply exit out and head back in again. You don’t even have to change your Pokémon, go straight back into Snapshot mode, and try again.
Recommended Reading: How Many Levels In Pokemon Go
What Is The Cameraman Medal
The Cameraman medal is new and specially made for catching Smeargles. You are awarded the bronze medal when you get 10 or more photobombs from Smeargle, 50 times for the silver, and finally, a whopping 200 to get the gold medal. So, if you’re a completionist, it’s best to take Snapshots every day to increase your chances. Given that Smeargle can generally only photobomb you once a day, and even that isn’t a guarantee, you may be working on that medal for the better part of a year.
There appear to be some glitches in the medal so far, we had an issue where it didn’t populate into the medal list for 24 hours. I’m sure this is just server load issues and will resolve itself, so don’t be afraid if you don’t see it immediately.