Wednesday, June 15, 2022
HomeEditor PicksHow To Pair Pokemon Go Plus

How To Pair Pokemon Go Plus

Remove The Back Cover

How to fix POKEMON GO PLUS that will not Connect / Pair with phone EASY FIX

Turn your Pokémon Go Plus over in your hand and begin loosening the screw at the bottom of the back clip cover with the #0 Phillips-head screwdriver. You dont have to unscrew the screw all the way out. Loosen the screw just enough that you can pull the back off of the Pokémon Go Plus device so that you dont lose or misplace the tiny screw while replacing the battery.

Once the back cover is removed, set it aside for later. Be careful not to lose the screw.

Jennifer Wilber

How To Pair The Tracker With Your Phone

Before you can catch, you gotta pair!


  • Pull the plastic tab out of the tracker.
  • Launch the Pokémon Go app.
  • Tap the Pokéball icon at the bottom of the screen.
  • Select the Settings icon.

  • Select Pokémon Go Plus.
  • Note: You can’t press and hold the button to pair. If you see a blue light, press again until you feel a vibration to cancel the pairing process.

  • The tracker should appear in the Settings screen. Tap on it.
  • Your Plus is now connected to Pokémon Go.
  • Reattach The Back Cover

    Place the back clip cover or bracelet cover back onto the Pokémon Go Plus. Make sure to gently slide the back cover on starting from the top of the device because there is a small lip on the cover to help hold it in place. Snap the back cover onto the main part of the Pokémon Go Plus and then tighten the screw securely. Be careful not to over-tighten.

    Press the button on the Pokemon Go Plus to make sure the new battery works.

    Jennifer Wilber

    Don’t Miss: How Many People Played Pokemon Go

    How To Wear The Pokmon Go Plus Tracker

    In most cases, you’ll want to attach the included band so that you can have your Pokemon Go Plus easily accessible on your wrist. If you prefer, you can also use the clip to keep it attached to your shirt or pants pocket. Here’s how to switch it up:


  • On the back of the tracker locate the small screw
  • Use small screwdriver to remove the screw
  • Place front of tracker in the wristband
  • On the bottom of the wristband locate the small screw
  • Screw the back into the front
  • Adjust the band to fit your wrist
  • Cant Connect To Your New Device

    How to pair Poke Ball Plus with Switch and get Mew ...

    If youve successfully wiped the Go Plus and cant connect to your new device, tapping the the Go Plus button can help you figure out its current status. A blue flashing light means it already has a device in its memory. Its possible its your new device, it just failed to fully connect inside the app. At that point, just force close the app, re-open it, and try connecting again.

    If youre still having trouble, you can always start again from scratch by pressing the Pokemon Go Plus eject button inside the app and then force closing it. After that, you can re-wipe the Go Plus itself to get it back to its original factory state. From there, reopen the app, and try to connect again .

    Getting the device unpaired and then paired with a new Android is easily one of the most frustrating experiences Ive ever had to deal with. Youll need a lot of patience and may have to re-do many of the steps before it cooperates. We suggest having plenty of beer on hand.

    Don’t Miss: How To Soft Reset Pokemon Ultra Moon

    Your Pokmon Go Plus Wont Power On Now What

    Niantic has recently released some major updates that enable increased player interactivity to the popular augmented reality mobile game, Pokémon Go. Pokémon Go players now have the ability to add friends and send or receive gifts. Players can also trade with nearby friends. These small improvements have reignited players’ hopes for a more robust trading feature that allows players to trade with faraway friends over the internet. Because of this major update, many Pokémon fans who had grown bored of Pokémon Go are returning to the game in droves.


    If you are like me, you were probably excited to dust off your old Pokémon Go Plus device to venture outside and begin collecting gifts, only to find that the devices battery has died since the last time you played. Fear not! It is super easy to replace the battery in your Pokémon Go Plus. You just have to have the right replacement battery and a screwdriver at hand.

    Final Verdict: Pokemon Go Plus Vs Pokemon Go

    To me, the best Pokemon Go tracker is a better choice than the Pokemon Go-tcha because of several reasons:

    • The Pokemon Go-tcha flaunts a better aesthetic and a replaceable silicon band.
    • It offers a more stable connection and doesnt have random disconnection issues.
    • The rechargeable battery inside the package is cost-effective as you dont have to buy new batteries every now and then.
    • The Go-tcha can autocatch a Pokémon and auto-collect items at nearby Pokéstops.
    • It also comes at a cheaper price compared to its competitor.

    However, if you are a big fan of Nintendo, you may prefer the Pokemon Go Plus. It also has a lot of functionalities on offer for its price. At the end of the day, the choice is all yours to make. Either device will be a huge help for both beginners and high level players whove been with the game from the start.

    Which Pokemon Go tracker do you think will bring you to the top of your game? Is it the Pokemon Go Plus or the Pokemon Go-tcha? Do you have either the Pokemon Go Plus or Pokemon Go-tcha already ? Still have questions about Pokemon Go trackers?

    Leave your comments below, then share this post with all of your Pokemon Go loving friends!


    Also Check: Where To Get Eevee In Pokemon Sword

    How To Unpair Your Pokmon Go Plus Tracker

    If you bounce between devices or want to give someone else a shot with your tracker, you can easily unpair it and get it set up with another phone.

  • Pull the plastic tab out of the tracker.
  • Launch the Pokémon Go app.
  • Tap the Pokéball icon at the bottom of the screen.
  • Select the Settings icon.

  • Hit the eject icon next to the paired tracker.
  • How To Pair Pokmon Go Plus With Your Smartphone

    Pairing your Pokemon Go Plus to an IOS Device!

    Linking your Pokémon Go Plus to your smartphone app is simple:

    • Enable a bluetooth connection to your phone.
    • Launch Pokémon Go
    • Select the menu by tapping the poké ball at the bottom of the screen.
    • Open the Settings menu in the top-right corner
    • Select the Pokémon Go Plus option
    • Press the button in the center of your Plus device.
    • Your Plus will now appear in the list of Available Devices on your phone.
    • Select your Plus device to pair it with your phone.

    You can now use your Plus in conjunction with your Pokémon Go app.

    Recommended Reading: Build Your Own Pokemon


    Pokmon Go Plus Problems: Connection And Pairing Issues And What Red Light Means

    The Pokémon Go Plus has been released in most parts of the world and like any accessory there will be some problems. The new accessory can have some connection issues, problems with the LED light or having trouble pairing with your smartphone or device.

    With all that said, the Pokémon Go Plus does work well, but there are some quirks with the device that some users may not be aware of. We compiled a list of common issues with the Pokémon Go Plus , a l o n g with some quick fixes. The official Pokémon Support page also has some troubleshooting steps, so be sure to check that out as well.

    Pokémon Go Plus LED Does Not Light Up?

    Make sure the battery on your Pokémon Go Plus is installed properly. Each Pokémon Go Plus device comes with a battery but it could have become dislodged. The battery is found on the back of the device. Use a Phillips screwdriver and loosen the screw then pull open the cover. Make sure the battery is tight.

    Replace the battery with a new one. If the LED light still doesnt light up, you can replace the battery with a new one or simply remove and reinstall it. Make sure the battery has been set correctly, with the and terminals facing in the proper directions. Ensure you are using the right kind of battery .


    Pokémon Go Plus Cannot Connect To Smart Device?

    If you are having trouble pairing with your device follow these steps:

    1. Restart your phone, and then re-launch the Pokémon GO app.

    2 . Go to the settings menu, and tap Pokémon GO Plus.

    What Is The Pokmon Go Plus

    The Pokémon Go Plus is a peripheral for Pokémon Go which can be worn either on the provided bracelet band, or as a pin on your clothes.


    Shaped like a combination of a Poké Ball and the Google Maps pin – because, you know, Pokémon Go is essentially Poké Balls plus maps – it’s around the size of a large smartwatch, although of course only provides functionality when used with the Pokémon Go app.

    The main point of the Pokémon Go Plus is to enable you to enjoy the game – or if you’re anything like us at times, compulsively obsess over the game – without having to use your phone.

    It connects to your smartphone via Bluetooth, and will notify you of a nearby PokéStop or wild Pokémon with a vibration and blinking LED.

    The greatest benefit, really, is the fact that you can do these things without draining your phone’s battery life at quite the same rate as doing so normally – helpful since battery drain in Pokémon Go is a recognised issue.

    That is, unfortunately, mitigated somewhat by the fact that it’ll be using your phone’s Bluetooth, but it’s still a bit of an energy saver.


    You May Like: Pokemon Home How To Get More Boxes

    Setting Up The Pokemon Go Plus For The First Time

  • Turn on your smartphones Bluetooth.
  • Remove the Go Plus from its packaging and pull out the paper tab.
  • Open the Pokemon Go app and go to Settings> Pokemon Go Plus.
  • Press the button on the Plus once .
  • Tap on the darkened Pokemon Go Plus under Available devices from inside the app.
  • Wait for the message Successfully connected to the Pokemon Go Plus .
  • What Is The Pok Ball Plus And How Does It Work

    How To Pair / Connect POKEBALL PLUS with Pokemon GO

    The Poké Ball Plus still hasn’t been completely explained – although there’s plenty we do know already.

    We know it’ll function like a Pokémon Go Plus – more on that itself below – when connected to Pokémon Go, allowing you to do all the same things like catch Pokémon and spin stops as you go.

    As well as that, we know it’ll have Pokéwalker-style functions for your Pokémon from Let’s Go Pikachu and Let’s Go Eevee. You can put them “in” the Poké Ball Plus and, by tracking your steps as you walk around with it, it’ll unlock certain unspecified benefits for you or your Pokémon in-game. Junichi Masuda, head of Let’s Go developer Game Freak, also confirmed to us that there will be some different, special features.

    “One cool thing if you put your partner Pokémon – so maybe your Pikachu – inside of it, I think maybe there’s some extra things that makes it feel as though the Pokémon is really inside the ball… for example if you shake it, it’ll actually sounds like it’s in there, so things like that – and also some things we haven’t revealed, that are cool that affect the gameplay if you walk around with it,” he said.


    We weren’t allowed to touch it out in Japan but, rest assured, were told it felt very nice. It has both a wrist strap and a smaller hoop for you to hook a finger through to make sure it’s secure in your hand – and so no kids go throwing it through the TV.

    Also Check: Usum Soft Reset

    How Do You Pair A Pokemon Go Plus

    First, make sure your phones Bluetooth is on. Pair with your smartphone and then open the Pokemon Go app. Click the Pokeball icon and choose to go to the Settings. Once you see an option to connect to the Pokemon Go Plus, tap on it and it should start searching for the device.

    Tap on the device to sync with your phone and it should light up to notify you that they are now connected. Now, you dont have to look at your smartphone all the time. Simply put it in your pocket while the gadget keeps you in the game.

    How To Connect Pokmon Go Plus To Your Phone

    The Pokémon GO Plus needs to be synced to your phone before you can use it. After making sure you’ve downloaded the most recent version of the app, open up Pokémon GO and go to the Settings menu. Select the “Pokémon GO” option, then pair up your phone and the accessory by pressing the button on the GO Plus to link the devices.

    Also Check: King’s Rock Pokemon Go

    How To Collect Items From Pokstops With The Pokmon Go Plus

    When you’re in the vicinity of a PokéStop, your Pokémon GO Plus will vibrate and blink blue. Press the button to collect items. The light will blink multicolor for successful retrieval, and will shine red if the PokéStop is out of range.

    After a recent update, Pokemon Go Plus will interact with Gym Photo Discs, and you can push the button to collect items.

    If your bag is full and you can’t collect anymore items, your Pokémon GO Plus will vibrate and show a white light.

    Test The Pokmon Go Plus Device

    How To Pair / Connect POKEBALL PLUS with Pokemon GO

    Test the Pokémon Go Plus to make sure the new battery is in proper working order. Press the center button. The LED light in the button should light up. If everything works, you can then pair the Pokémon Go Plus to your phone.

    Open the “Pokémon Go” app to pair the Pokémon Go Plus to your phone once more.

    Jennifer Wilber

    Also Check: How To Get Eevee In Pokemon Sword And Shield

    How To Pair The Pokeball Plus With Pokemon Go On Ios Android

    The Pokemon Lets Go Pokeball Plus works on Switch of course, but also can be paired with Pokemon Go on iOS or Android devices. Were here to help do just that!

    The new Pokeball Peripheral can take the place of the Pokemon Go Plus peripheral, helping count your steps, catch Pokémon and automatically spinning Pokéstops.

    Pokemon Go Plus Failed To Connect Fix

    A Pokemon Go Plus failed to connect error message may be causing you and other Trainers a few headaches. The device is supposed to let you catch Pokemon and collect items with ease, but this ongoing issue has been plaguing players for a while now. If youd like to know how to fix this problem and get back to becoming a Pokemon Master, were here to help. Youll need to read our Pokemon Go Plus failed to connect guide to find out whats behind the bug and what steps you can take to resolve it.

    Recommended Reading: How To Make Fake Pokemon Cards

    Pokemon Go Plus Not Connecting Android

    Please follow the following steps to troubleshoot the Pokemon go plus not connecting android:

    • Unpair and pair your device.
    • Open Settings menu on Android device.
    • Toggle on the Bluetooth option to turn it on.
    • Tap on the function button on Pokemon Go Plus and then tap on Search for devices on your phones Bluetooth menu.
    • Select the Pokemon Go Plus and then open the Pokemon Go app.
    • Head to Map View and tap on the Main Menu.
    • Tap on Settings located at the top right corner.
    • Tap on the Pokemon Go Plus option.

    Last, on your Pokemon Go Plus, tap on Pokemon GO Plus. Now, on your phone, tap on the Pokemon GO plus located in the Available Devices list. Upon successful connection, your device will vibrate.

    Questions You May Also Want To Know

    The Official Pokemon GO Plus Accessory Pings You When A ...

    Q1: Pokémon Go plus not showing in available devices how to fix

    Check if your phone supports Bluetooth LE. If the Bluetooth is enabled on your phone and youre still facing connection issues. You need to restart your phone and launch the Pokemon GO app. Then, go to the Settings menu and search for the Pokemon Go Plus option in the available devices list.

    Q2:Pokémon Go plus flashing white how to fix

    Press on the Function button on the Go Plus for one time only. If your device flashes white then its ready for pairing. Press and hold the Go Plus Button until it shows solid blue light. Press and hold the button again until it vibrates. The vibration indicates that the device is unpaired. Open the Pokemon Go App and head to Settings> Pokemon Go Plus. Under Available Devices, tap on the Pokemon Go Plus and wait for the Success message

    You May Like: What Are Fairy Type Pokemon Weak To

    Refresh Pokmon Go Plus

    Refreshing is the very first thing you should try when Pokémon Go Plus Not Connecting Android. We suggest you should follow these steps:

  • Press Go+ button, wait until it stops blinking blue. Remember not to do anything with your phone this time.
  • Hold Go+ button until it shows solid blue
  • Release, then hold Go+ button again until it vibrates
  • Press Go+ button , it should now blink white.
  • Check if Pokémon Go Plus connects with your phone or not.
  • This method is easy but it works for many users.

    Unpairing And Setting Up The Pokemon Go Plus On A New Device

    To use the Go Plus with another device, youll first need to unpair it from the original. First, try pressing the button on the Go Plus once. If it flashes white its ready to go . If it flashes blue, that means its already been paired to another device and will need to be wiped before it can be paired with a new device. Heres how you do it:

  • If the Go Plus light is still blinking, wait for it to stop.
  • Press and hold the Go Plus button for 5 seconds until it lights up solid blue then release.
  • While the light is still solid blue, press and hold the button for another 5 seconds. The Go Plus will vibrate letting you know it has been successfully unpaired from the previous device .
  • Open the Pokemon Go App and go to Settings> Pokemon Go Plus.
  • Press the button on the Go Plus once .
  • In the app, under Available devices, tap on the darkened Pokemon Go Plus.
  • Wait for the Success message to appear .
  • Also Check: How To Get The Pokeflute In Pokemon Fire Red

    RELATED ARTICLES

    Most Popular